Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11

Scion Platypus Pro-Series License Plate Mount

$79.00

Due to it's clever design and sturdy construction, our no drill license plate mount is easily the best value on the market today.
  • Avoid tickets without drilling your bumper
  • Fits right and will not alarm your PDC sensors
  • Tough construction and rigid design, made in the USA

SKU:

Avoid Tickets Without Drilling Your Bumper

The Platypus utilizes the existing tow eye in your bumper, so you do not have to drill any holes in your new car. This method of installing the front plate is common and legal in all states that require front license plates. At times when the plate is not needed, it can be removed easily, leaving no trace that it was ever there.

Fits Right and Will Not Alarm Your PDC Sensors

We have designed and tested hundreds of configurations on many current vehicle models and trim levels, this is not a one size fits all system. The model for your vehicle will sit tight to the bumper so that is looks like it was meant to be there, and it will also avoid setting off the sensors on your bumper (if you are having a sensor issue, troubleshoot it or contact us and we will resolve it!) Although it will sit close, the sturdy plate backing will not scratch your bumper no matter how you drive.

Tough Construction and Rigid Design, Made in the USA

The 12 gauge steel Plate Backing is full sized so that the edges of your license plate do not get bent in a car wash or otherwise. That plate has a black powdercoat baked on that will last forever. The Stud is lathe machined from 6061 aluminum and black anodized. We make them at the high end of the receivers tolerance so that the studs fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does). The button head hardware is stainless steel, and uses an allen key to discourage theft. The hardware provided is the exact right length for your plate and will not stick through the back to scratch your bumper, if you would like to install a plate frame you will need a longer set of hardware for $1 here.

There's a Design for nearly every Scion Vehicle

We make a specific kit for almost every car Scion makes. If your car is on the list then you can be sure that we have worked with the local vehicles to test the fit. If you don't see your specific model, let us know and we would be happy to see if we can find a solution for you.

*Our FR-S kit requires some slight adjustment out of the box in order to mount without touching the bumper. The angle of the mounting tab on our back plate just needs to be increased slightly to better match the angle of the bumper. Once properly installed, the plate should never be touching the bumper.

  • Scion FR-S (2012+)
  • Scion iQ (2012+)
  • Scion tC (2011+)
  • Scion xA
  • Scion xB (2004-2007)
  • Scion xB (2008+)
  • Scion xD (2008-2014)
  • Scion iM (2015-2016)

Product Videos

Installing Your Platypus 01:00

  • Installing You...

Product Reviews

Write Review

  1. doesnt fit on the tc2.5 3 Star Review

    Posted by on 4th Feb 2016

    Had to use about 6+ washers and a longer bolt to keep the plate mount from touching the bumper. Looks nice though which is why I gave it 3 stars.