THANK YOU for purchasing the Chevy Spark Gemini Phone Mount from CravenSpeed. This product is made from the highest grade materials, and is guaranteed to be free from defects.
- 1x Flex Arm Phone Mount
- Plastic Panel Tool or Flathead Screwdriver
- 10mm socket wrench w/ extension
- 10mm open end wrench (optional)
- Using the plastic panel tool, or another thin object that will not scratch the plastic, pry at the round panel at the back of the gauge cluster.
- Using your 10mm socket or wrench, unfasten the nut holding the gauge cluster in place.
- Screw the bottom end of the FlexArm onto the stud protruding from the back of the gauge cluster.
- *Optional* If you are unable to tighten the FlexArm all the way, use the 10mm open end wrench at the base of the 17mm ball to finish tightening the mount.
- Place your phone into the phone mount, and you’re done!