THANK YOU for purchasing The Dodge RAM Gemini from CravenSpeed. This product is made from the highest grade materials and is guaranteed to be free from defects.

Parts Included:
- Mounting Bracket w/ Ball
- Mounting Screws and Washers
- Magnet & Mount Plates
Tools Required:
- Short handle Torx 20
- Short handle Phillips Screwdriver
Procedure
Removing the Shroud Screws
- Locate the two rightmost Torx bolts on the underside of the instrument shroud.
- Remove both screws.




Installing the Mount Bracket
- Place the mount bracket's two spacers into the appropriate counterbores on the underside of the shroud.
- Place the washer onto the screw and then using the short handle screwdriver, install the longer screw into the left bushing.
- Then move on to installing the shorter screw with the washer into the right side bushing.






Installing the Magnet Mount
- First, slide the magnet mount collar over the ball feature.
- Next, pop the magnet mount over the ball.
- Finally, thread the collar onto the magnet mount
- With the plate stuck to your phone or case, you're set to go!




Congratulations… your Dodge RAM Gemini install is complete! Happy motoring with a secure phone.