THANK YOU for purchasing the Quad Light Bracket Kit for MINI F60 Countryman from CravenSpeed. This product is made from the highest grade materials, and is guaranteed to be free from defects.
Install the brackets on your MINI.
- As mentioned above, to fit this quad light bracket you'll need to have previously installed the Cravenspeed Rally Light Bracket Kit. If you currently have the PIAA lights installed (or aftermarket lights), remove them at this time from the CS rally light bracket tabs that fit through the grill.
- Place the Quad Light Bracket up to the grill light tabs and check the width of the mounting holes. If they do not line up with the width of the end holes on the quad light bracket you'll need to loosen the bracket clamps behind the grill and adjust them on their mounts to match.
- Once the holes line up on the ends of the brackets, set the quad light bracket on top of the grill tabs and install your aux light mounting bolts through both the quad bracket and the tabs coming through the grill. The quad bracket should be oriented with the curved edge forward and the angled sides up.
- With your two outer aux lights now installed and tightened, proceed with the light and wiring installation of your additional aux lights that will mount into the middle two points.