null Skip to main content

Shark Fin Antenna Install Guide

THANK YOU for purchasing the Shark Fin from CravenSpeed. This product is made from the highest grade materials, and is guaranteed to be free from defects.

You can buy our CravenSpeed Shark Fin Antenna for here

Parts Included:

  • Shark Fin antenna
  • Locking nut and screw
  • 3M Permanent Adhesive

Tools Required:

  • Masking Tape (or other non-permanent marking material)
  • Philips Head Screwdriver

Procedure

arrow-tip

    1. Remove your factory antenna.

    2. Stick 3M adhesive to the Shark fin, by removing one side of the adhesive cover.

    IMG_1180.JPG

    IMG_1181.JPG

    3. Test fit your Shark fin, and mark when you’ve got it straight. I used blue masking tape.

    IMG_1177.JPG

    4. Attach the antenna with the locking nut and screw.

    IMG_1174.JPG

    IMG_1176.JPG

    5. Remove the cover on the bottom end of your 3M adhesive, and appy the Shark fin to your roof, using the lines or tape from step 3.

    IMG_1181.JPG

    IMG_1182.JPG

!