Shark Fin

THANK YOU for purchasing the Shark Fin from CravenSpeed. This product is made from the highest grade materials, and is guaranteed to be free from defects.

Parts Included:

  • Shark Fin antenna
  • Locking nut and screw
  • 3M Permanent Adhesive

Tools Required:

  • Masking Tape (or other non-permanent marking material)
  • Philips Head Screwdriver

Procedure

arrow-tip

    1. Remove your factory antenna.

    2. Stick 3M adhesive to the Shark fin, by removing one side of the adhesive cover.

    IMG_1180.JPG

    IMG_1181.JPG

    3. Test fit your Shark fin, and mark when you’ve got it straight. I used blue masking tape.

    IMG_1177.JPG

    4. Attach the antenna with the locking nut and screw.

    IMG_1174.JPG

    IMG_1176.JPG

    5. Remove the cover on the bottom end of your 3M adhesive, and appy the Shark fin to your roof, using the lines or tape from step 3.

    IMG_1181.JPG

    IMG_1182.JPG