THANK YOU for purchasing the Fiat Shift Knob from CravenSpeed. This product is made from the highest grade materials, and is guaranteed to be free from defects.
Parts Included:
- 1x Knob Body
- 1x Knob Cap
- 6 ea Screws
Tools Required:
- Knife
- 10mm Socket
Procedure
1) Use a knife to gently lift the shift patterned plastic covering the retainer bolt on the shift knob. This cover is held in place with double-sided adhesive tape.
2) Once the retainer bolt is revealed, use a 10mm socket to remove the bolt.
3) Take off the ‘layers’ of knob and save or discard.
4) Place the Stainless Steel Knob Body on the shaft and re-use the OEM retainer bolt.
5) Put the cap in place and tighten all 6 cap screws.
