VW Phone Mount Instructions

THANK YOU for purchasing The Volkswagen Phone Mount for Mark 5&6 Jetta/Golf from CravenSpeed. This product is made from the highest grade materials and is guaranteed to be free from defects.

Parts in the box.

Parts Included:

  • Flexarm w/ Ball
  • Mount Base and Toggle Bolt
  • Magnet & Mount Plates

Tools Required:

  • Plastic Panel Pry Tool

Procedure

arrow-tip

Removing the Blank Switch

    Removing the blank switch.
  1. Using the plastic panel pry tool, pry out one of the middle blank switches.

Installing the Mount

  1. Loosening the supplied toggle bolt until it's almost free from the Flexarm, activate the toggle bolt as shown.
  2. Placing the toggle bolt in the correct position.
  3. With the two wings of the toggle pointing left and right, push the toggle through the opening, insuring that it has opened all the way by pulling up on it.
  4. Installing the toggle.

    We have removed the two blank switches on either side for illustration purposes, but you shouldn't have to.

    Installed toggle, complete
  5. Then begin screwing the toggle bolt back in by turning the flexarm clockwise.
  6. Tightening the toggle bolt.

    In order to prevent the toggle from spinning in place, pull up on the Flexarm as you tighten it clockwise.

    Toggle bolt tightening, complete

Congratulations… your VW Phone Mount install is complete! Happy motoring with a secure phone.