An Easy Way To Mount a Magnetic Badge
Whether you are a collector or just want to display the badge from the most recent meet you attended, you will need a good way to show it off. This badge holder installs painlessly onto the grille and looks great.
A Badge For Every Occasion
Motoringbadges.com has over 150 magnetic badges listed on their site that allow you to tell the people you pass on the road whatever it is you want to tell them. Most major meets create a magnetic badge, and your club probably has one too.If you have a collection of them then you might like our license plate mounted Triple Badge Holder. This one mounts to the bolts that hold on your front license plate. You could put one on top and one below and display 6 badges at a time.
Fits all current MINI Models*
*Please note: on the 07+ Cooper and Clubman (Cooper S does not require modification) hatchbacks the stock grill requires that two holes be drilled out to allow the 2 bolts to go through from the back. For some reason MINI decided to put a solid backing on the Cooper grill behind the chrome slats...silly. Please email us because we also need to send 2 longer bolts (1.5") to allow the badge to be assembled. The supplied screws are not long enough for the 07+ Cooper and Clubman (the horizontal chrome slats) Hatchback grill.
On the Gen 1 MINI the grill does not need to be removed as the back is accessible once the hood is popped.
On the Gen 2 MINI's the 4 black plastic rivets come out in about 20 seconds each and the lower trim just pops off with a bit of force and there are a few giant "squeeze tabs" behind the trim and once those are released the whole grill pops off which allows easy access to the back so the badge can be installed.
Product ReviewsWrite Review
Good product - wrong length screws
Posted by Unknown on 6th Sep 2016
Grill badge would have been easy enough to attach if the right length screws would have been included. After a trip to the hardware store for more screws and additional washers to help bridge the space difference, it's on & is very sturdy. The product I received looked slightly different than photo: both the holder and "brace" are circles and the screw placement is in the center of both pieces (not offset as in the photo).
FYI, you don't get the stickers pictured with the badge holder (or I didn't anyway).
Love the Grille Badges
Posted by Cindy Medina on 22nd Jul 2014
I have started using them in 2006. Love them!