Strut Tower Defenders

Whether you are competing at an autocross or driving on a Sunday afternoon your MINI is at risk. Because around every corner, in the very depths of every pothole, and the pinnacle of every bump G forces lie in wait. The occasional G may seem harmless by itself, but at times there may be several lurking in one rut and once they have done their damage to the sheet metal atop your tightly sprung strut towers, it will be difficult to resume normal activity.

Less than one inch of tower deformation can be extremely detrimental to your MINI's alignment. This has been a common issue that MINI owners have had to face. It is a compromise in the design of the vehicle, where the tight springs allow for the griptastic handling that we love on the twisties, but are the main reason that our MINI's have a unique disposition for sheet metal deformation.

Craven Speed STDs are a preventative measure. Instead of suffering the consequences of a lack of protection, using STD's to your advantage will strengthen your MINI's strut towers before deformation can occur. By sandwiching the sheet metal between the strut and our 1/2 inch thick aircraft aluminum plate, it is strengthened ten-fold. STDs come in pairs, one for the right tower and one for the left. Craven Speed STDs retain a 1/2 inch thickness throughout ensuring that there are no weak spots. Installation is easy, using the included instructions, it will take about 10 minutes to ensure that you do not have to go through a lengthy and expensive alignment repair. You do not need to lift the car, and the only tool needed is a torque wrench.

Craven Speed STDs are available for both the 2002-2006 (R50/52/53) MINI and the second generation (R55/56/57). The pair comes with custom made, 14mm, bolt adapters. These adapters are necessary to allow installation of such a thick plate without weakening the piece at the attachment points.