10/27/2020 - We are closed to walk-ins. All orders will ship on schedule.

Acrylic Wind Deflector for Mazda Miata MX-5 ND

THANK YOU for purchasing the 'MX-5 Things' Acrylic Wind Deflector for Mazda Miata MX-5 ND from CravenSpeed. This product is made from the highest grade materials, and is guaranteed to be free from defects.

Parts Included:

  • 1 x Clear Acrylic Wind Deflector

Procedure

arrow-tip

Let's get started

    Fold back your MX-5's soft top and let's get to it. Grasp the OEM wind deflector directly above each mounting point, firmly pull straight up and off the car and place it into your parts bin.

    Take the acrylic wind deflector and observe the orientation of the mounting points that go into the receptacles. The 'hook' ends should be open to the back of the car.

    Set the posts down into the receptacles until they're full inserted. You may not sense the posts engaging, so make sure they're snug.

    The acrylic wind deflector also comes equipped with adjustable, rubber mounting pads that grip the roll bars. If necessary, you can firm up the wind deflector further by sliding the rubber mounting pads up until they grip tighter against the roll bars.

    That's all there is to it! Hop in your MX-5 and enjoy the increased visibility and reduced wind buffeting.