Fiat 500L Front License Plate Holder
The Platypus is a front license plate bracket that is made in the USA to exacting specifications. It is one of the best Fiat 500L accessories for keeping your license plate holder legal with no drilling required.
In many states, you need a front plate on your Fiat, but that does not mean you have to drill it in permanently. This Platypus is designed to fit the existing port on the front bumper of a 500L for model years from 2014 to 2018. This method of installing the front plate is common and legal in all states that require front license plates. At times when the plate is not needed, it can be removed easily, leaving no trace that it was ever there.
We believe that touchless is the only kind of automatic car wash anyone should subject their Fiat's paint job to. If you absolutely need to use a rag car wash, then the Platypus should be removed to avoid getting caught up in the machine. We have planned for this. Using the included flat wrench you can loosen the bolt a ¼ turn and then slide the plate off before the wash. This takes less than a minute. Although we have never had a plate backing come loose accidentally, each plate backing is balanced such that if it did the plate would hang and not fall off.
Exact Fit for Your Fiat
This is not a one size fits all system. After a decade of experience fitting hundreds of models and trim levels this is our exact fit front plate bracket for a 2014-2018 Fiat 500L. The Platypus is exceptionally stable because we do not build in the adjustability that more universal kits require.
According to our test fitting this kit fits 2014-2018 Fiat 500L.
Pick a different vehicle here
The placement of this Platypus kit will avoid triggering the PDC sensors on your Fiat. At most, you will need to manually adjust the angle of the plate once installed to ensure the whole plate is out of the sensors view.
Fits Year(s): 2014, 2015, 2016, 2017, 2018
Your Platypus is Guaranteed to fit! If you have any problems, please contact us at email@example.com or call 503-505-6886. M-F 8am-4pm PST
The black powder-coated mounting plate is the full size of your license plate and includes stainless steel button head screws that look excellent.
The stud portion is machined from 6061 aluminum and black anodized. We make the studs at the high end of the receivers tolerance, that way the stud fits tight and stays put while you drive (this means that the stud will not go in without a wrench, like the stock tow hook does).
The hardware provided is the exact length for your plate mount and will not stick through the back to scratch your bumper, if you would like to install a plate frame or plate cover you will need a longer set of hardware for $1 here.
:a usually written guarantee of the integrity of a product and of the maker's responsibility for the repair or replacement of defective parts
CravenSpeed warranties everything that we make. The time period is infinite.
Customer ReviewsSubmit Review
This product hasn't been reviewed yet, let us know what you think and we'll show off your car here!