THANK YOU for purchasing the Shark Fin from CravenSpeed. This product is made from the highest grade materials, and is guaranteed to be free from defects.
You can buy our CravenSpeed Shark Fin Antenna for here
Parts Included:
- Shark Fin antenna
- Locking nut and screw
- 3M Permanent Adhesive
Tools Required:
- Masking Tape (or other non-permanent marking material)
- Philips Head Screwdriver
Procedure
- Remove your factory antenna.
2. Stick 3M adhesive to the Shark fin, by removing one side of the adhesive cover.
3. Test fit your Shark fin, and mark when you’ve got it straight. I used blue masking tape.
4. Attach the antenna with the locking nut and screw.
5. Remove the cover on the bottom end of your 3M adhesive, and appy the Shark fin to your roof, using the lines or tape from step 3.
