null Skip to main content

Gemini Phone Mount Install Guide - RAM 1500

THANK YOU for purchasing The Dodge RAM Gemini from CravenSpeed. This product is made from the highest grade materials and is guaranteed to be free from defects.

You can buy our CravenSpeed Gemini Phone Mount for RAM 1500 here

Final installation

Parts Included:

  • Mounting Bracket w/ Ball
  • Mounting Screws and Washers
  • Magnet & Mount Plates

Tools Required:

  • Short handle Torx 20
  • Short handle Phillips Screwdriver



Removing the Shroud Screws

    Tools required to remove the screws
  1. Locate the two rightmost Torx bolts on the underside of the instrument shroud.
  2. Displaying the shroud screws
  3. Remove both screws.
  4. Removing the shroud screws Removing the shroud screws

Installing the Mount Bracket

  1. Place the mount bracket's two spacers into the appropriate counterbores on the underside of the shroud.
  2. Placing the bracket under the shroud
  3. Place the washer onto the screw and then using the short handle screwdriver, install the longer screw into the left bushing.
  4. Installing the long screw Installing the long screw, complete
  5. Then move on to installing the shorter screw with the washer into the right side bushing.
  6. Installing the short screw Installing the short screw, complete Installing the bracket, complete

Installing the Magnet Mount

  1. First, slide the magnet mount collar over the ball feature.
  2. Installing the collar
  3. Next, pop the magnet mount over the ball.
  4. Installing the magnet mount, before Installing the magnet mount, during
  5. Finally, thread the collar onto the magnet mount
  6. Installing the magnet mount, before
  7. With the plate stuck to your phone or case, you're set to go!

Congratulations… your Dodge RAM Gemini install is complete! Happy motoring with a secure phone.